For a price list, contact
tecfen@tecfen.com
HOME | SITE MAP | BROCHURE | MAILING LIST | CONTACT US
Please visit our new Otological Ventilation Tubes page at:
http://tecfenmedical.com/otological-ventilation-tubes/

Otological Ventilation Tubes

TUBES ARE ALSO AVAILABLE IN NONE-STERILE, BULK PACKED, AT REDUCED PRICES

SHEPARD DESIGN
Classic, popular grommet design for easy insertion, adequate ventilation and short term duration.

10/box
TE-7007-CE Fluoroplastic With wire to facilitate easy removal 1.0mm I.D
 TE-7011-CE, Fluoroplastic 1.14mm I.D. 		10/box
TE-7008-CE Fluoroplastic Without wire 1.0mm I.D.
TE-7014-CE Fluoroplastic 1.14mm I.D. Without wire

SHAH DESIGN
Similar to Shepard design with extended tab or wire on outer flange to facilitate insertion.

Addition of "Shoehorn" elongated tongue on inner flange allows smaller incision and easier insertion and helps prevent early extrusion.
10/box
TE-7016-CE Polyethylene With Tab  1.1mm I.D.
10/box
TE-7018-CE Fluoroplastic With Wire  1.1mm I.D.
DONALDSON DESIGN
Popular ventilation tube due to its straightforward design which resists extrusion. Silicone material offers elasticity for easy insertion. Available with or without integral tab.
10/box TE-7024-CE
Silicone With tab to facilitate easy removal 1.1mm I.D.
TE-7025-CE
Silicone Without tab 1.14mm I.D.
BEVEL BOBBIN DESIGN
Combining the best features of the Baxter Bevel Button and the Reuter Bobbin, the beveled shape resists occlusion and clears easily.
10/box
 TE-7029-CE Fluoroplastic Without wire 1.14mm I.D. 
PAPARELLA DESIGN
Unique design of notched inner flange facilitates insertion through simple "twist-in" movement.

Very stable for long-term implantation. Integral tab for removal with forceps.

Type II is a long-term design similar to the short-term Type I. Type II has large inner flange allowing easy placement and 1.5mm inner diameter to help prevent blockage.
Type I , 10/box
TE-7026-CE Silicone With integral tab 1.14mm I.D.		 Type II , 10/box
TE-7076-CE Silicone With integral tab 1.42mm I.D.
ARMSTRONG DESIGN
Beveled inner flange is angled to fit the tympanic membrane and resist premature extrusion. Type with outer flange which helps prevent migration into middle ear. For long-term ventilation.
10/box
TE-7056-CE Polyethylene Grommet Type Short Shaft
T-TUBE DESIGN
Proven to be the most popular long-term tube.

The T-flange and long shaft design keep the tube firmly positioned giving the surgeon complete control over length of ventilation time.

The silicone material allows soft flanges to collapse easily for introduction through a very small incision and safe and comfortable removal at any time.

Can be easily trimmed to adapt to the surgeon's needs.

Also features are pre-trimmed T-tubes for convenience.
10/box
TE-7089-CE Silicone  Pre-trimmed, 8mm Length, 2mm Flanges 
1.1mm I.D. 		10/box
TE-7091-CE Silicone Standard, 12mm Length, 4mm Flanges 
1.1mm I.D.
The following are available in 6 Tubes per box:

VT-0200-01 Shepard Silicone, with Tab 1.0mm I.D.
VT-0202-01 Shepard Fluoroplastic, 1.14mm I.D.
VT-0300-01 Paparella Silicone, 1.14mm I.D.
VT-0405-01 Touma T-Tube Silicone, 1.14mm I.D.
VT-0408-01 Touma II T-Tube Silicone, 1.2mm I.D.
VT-0500-01 Armstrong Beveled Straight Shank Silicone, 7.0 x 1.14mm I.D.
VT-0508-01 Armstrong Grommet, Modified Fluoroplastic,1.14mm I.D.
VT-0700-01 Umbrella I Silicone, 1.0mm I.D.
VT-0803-01 Shah Fluoroplastic, with Wire 1.14mm I.D.
VT-0804-01 Shah Fluoroplastic, 1.14mm I.D.
VT-1000-01 Collar Button Fluoroplastic, with Wire 1.27mm I.D.
VT-1601-01 Tiny Touma Silicone, with Tab 0.89mm I.D.

TUBES ARE ALSO AVAILABLE IN NONE-STERILE, BULK PACKED, AT REDUCED PRICES
Tecfen Corporation
5860-C Hollister Avenue
Santa Barbara, California 93117 U.S.A.
Phone
Fax
email
  
805 967 1153
805 967 1295
tecfen@tecfen.com